SPC Vinyl Flooring

Instructions :

1）Pre installation planning Before starting the installation, it is necessary to accurately measure the ground to be laid to determine the required quantity and style of stone plastic flooring. Meanwhile, it is necessary to prepare the necessary installation tools and materials. 

2) Basic ground treatment 

A) Cleaning work: Thoroughly clean the ground to ensure it is clean and dust-free.

 B) Humidity control: Dry or humidify the ground according to its humidity conditions to ensure a moderate humidity level.

 C) Ground leveling: For uneven or poor quality ground, leveling treatment is required to ensure the flatness of the ground. 

3）Specific laying method of stone plastic flooring 

A) Floor inspection: Before laying, carefully inspect the size and integrity of each stone plastic floor, and remove any scratched or deformed flooring.

 B) Laying sequence: Starting from one corner of the room, lay in an orderly manner according to the texture direction of the floor. 

C) Tight connection: closely splice the floor strips and gently tap them with a rubber hammer to ensure that the connection between floors is tight and seamless. 

D) Size adjustment: If it is necessary to cut or adjust the floor, a specialized floor cutting tool should be used to ensure the accuracy of the cutting.

 4）Edge finishing treatment: After the floor is fully laid, edge finishing strips should be used to finish the edges of the floor. Insert the edge strip into the gap between the floors and gently tap it with a rubber hammer to secure it in place, ensuring a tight fit between the edge strip and the floor. 5) After the later cleaning and maintenance installation is completed, the floor should be thoroughly cleaned and any obstacles that may scratch the floor should be removed. At the same time, maintain indoor ventilation and lay protective materials such as mats or carpets on the floor to extend the service life of the floor.